Effluent temperature monitoring
A PT100 sensor built into the optical probe
Temperature is measured by a PT100 sensor built into the optical probe. It matters on its own where a consent limits the temperature of the discharge, and it is used to correct other readings.
- SYZE-OCEMS-8P
- One of 8 parameters as standard
- CPCB
- HSPCB
- PPCB
At a glance
Supplied as part of the SYZE-OCEMS-8P, with all eight parameters as standard.
- Parameter
- Temperature
- Range
- 0–50 °C
- Method
- PT100 resistance thermometer
- Instrument
- Built into the optical probe of the SYZE-OCEMS-8P
- Reagents
- None
- Output
- RS485 Modbus to the SYZE data logger
- Reported to
- CPCB, HSPCB, PPCB and PHED
About temperature
- Built in
- No separate sensor to fit or wire.
- Used for correction
- Readings that depend on temperature are corrected with it.
- Reported where asked
- Sent to a board where your consent includes it.
- A year's record
- A full year of readings shows how the seasons affect treatment.
Questions
Do we need a separate temperature sensor?
No. It is part of the optical probe.
Is temperature sent to the boards?
Where your consent lists it; each parameter can be switched on or off for each board.
The analyser and the other parameters
- Online water quality analyser (8 parameters)Our main product: eight parameters as standard, made in India
- COD analyserChemical oxygen demand measured continuously at the outlet, without reagents
- BOD analyserContinuous BOD at the outlet, when the laboratory test takes three days
- TSS analyserTotal suspended solids measured continuously, by optical absorption and scatter
- pH analyserpH at the outlet on its own port, with automatic temperature compensation
- TOC analyserTotal organic carbon from the same UV–visible spectrum, as standard
- Turbidity analyserHow clear the effluent is, measured continuously as scattered light
- FlowFlow turns concentrations into loads, and every OCEMS station reports it
Further reading
See it working
Ask us about the parameters your consent lists.